This blog has been pretty moribund for a while, largely because my original intent for it is no longer relevant. I'm going to recast it over the next few weeks, once I work out how to remap the domain, as a simple personal blog. Whether that will mean I post more frequently, remains to be seen. This will only be the second such change since I started it in 2003, so not a bad achievement.
Richard Bowman, University of Bath and Julian Stirling, University of Bath
In factories and industrial estates across the world, exceptional efforts are being made to ensure hospitals have ventilators, and logistics firms have freezers and refrigerators. Behind the scenes, this manufacturing drive has been taking place on an epic, unprecedented scale. In some places, it’s also been horrendously inefficient.
Some of that inefficiency is only to be expected. Manufacturing responsively at such short notice was always going to be messy. But many of the hardware hold-ups we’ve witnessed – from production line bottlenecks to parts shortages – could be avoided in the future by applying an “open source” ethos to the world’s production of hardware.
Read more: Five ways collective intelligence can help beat coronavirus in developing countries
Open source design is a form of collective intelligence, where experts work together to create a design that anyone has the legal right to manufacture. The software industry has long shown that “open” collaboration is not only possible, but advantageous. Open source software is ubiquitous, and the servers that power the internet itself are largely run on open technology, collaboratively designed by competing companies.
Early in the pandemic, and in recognition of the global emergency that was unfolding, dozens of the world’s largest companies did actually sign up to the “Open COVID Pledge”, promising to share their intellectual property to help fight the virus. On a smaller scale, more than 100 project teams set out to create and share “open” ventilator designs that could be produced locally, helping address the pressing need for ventilators around the world.
Unfortunately, neither of these initiatives succeeded in producing ventilators at the rate required by stretched hospitals in the early weeks of the pandemic. After examining existing attempts to share the intellectual property of machines, our recent paper concludes that projects must be open from the start in order to make a success of open hardware. Everything from the first doodle on a napkin to the detailed calculations that verify safety must be available if other experts and manufacturers are going to participate in the design.
Producing hardware through open collaboration may be daunting. As opposed to the entirely virtual collaboration required for software development, hardware development needs physical parts – raw materials and machinery. It needs testing facilities and engineers to perform stress tests and safety checks.
There are promising signs that these challenges can be met. The RepRap 3D printer project has brought low cost 3D printing to a wider audience, making affordable prototyping possible at a distance. Meanwhile, the CERN White Rabbit project has shown that even the complex electronics that control the Large Hadron Collider can be developed as as open source hardware. But, to be efficient we need better work flows for collaboration – systems to help organise the distribution of tasks and responsibilities on collaborative hardware projects.
The journey from prototype to production is much more difficult, and less exciting, than the technical challenge of prototyping a device. Manufacturers must comply with international standards to ensure quality and manage risk related to their products. This is especially true of medical hardware, upon which lives depend. A key challenge for open hardware will be to achieve this certification in the same way that private companies do today.
Under current regulations, no matter how impressive and safe, ventilators constructed in volunteer maker spaces cannot be certified for medical use. But for equipment which is less strictly regulated, like face shields, open hardware is currently being leveraged successfully.
Achieving similar successes with high-tech medical devices will require organisations that are built to manufacture from open designs – dynamic factories, for instance, which will be responsive to global emergencies. It takes time to establish these organisations. But we can’t afford to wait for the next emergency: we should begin creating them today, in preparation for the next pandemic.
Of course, finding sustainable business models for open hardware is a challenge: can a system be created which shares intellectual property for free while helping designers and manufacturers profit? In one sense, open hardware has an advantage here: people are used to buying products, where online consumers are accustomed to using software for free.
Nonetheless, it’s likely that setting up an open hardware manufacturing ecosystem will need public funding, or investor funding buying into non-traditional business models. This would follow the trajectory of the internet, which began life funded by public institutions and is now home to the world’s biggest private enterprises.
We’ve experimented with our own open hardware project to help us understand how the future of collaborative hardware might look. Our OpenFlexure microscope is designed to be manufactured at low cost in sub-Saharan Africa, to be used for malaria diagnoses. We’ve probably spent more time designing the processes that help us share our knowledge effectively than designing the microscope itself.
In the short term, this slows our progress. In the long term, we expect that manufacturers anywhere in the world will be able to understand our design and adapt it to their local context. As these processes become further standardised, sharing designs for production will become increasingly simple. The final and most ambitious phase of our project will be working with manufacturers to produce microscopes certified for medical use – a huge step towards open source medical hardware we’d need to better fight a future pandemic.
Humanity already knew how to make ventilators decades before this pandemic hit. What was lacking was the access to this knowledge, the skills to work together on adapting a design, and the logistics to rapidly scale the manufacturing of complex machinery. It will take years to address these issues. Starting that process today will help us tackle global emergencies more dynamically and efficiently in the future.
Richard Bowman, Royal Society University Research Fellow and Proleptic Reader, Department of Physics, University of Bath and Julian Stirling, Postdoctoral Researcher, Department of Physics, University of Bath
This article is republished from The Conversation under a Creative Commons license. Read the original article.
The idea that democracy stops when you get the decision you like is getting more prevalent unfortunately. I say that regularly in response to comments on Facebook, although it never seems to get through. Only yesterday some ignorant low life tried to tell me I'm refusing to accept a democratic decision because I am critical of St Boris. The same low life also told to go to Europe if I didn't like it here.
I'm 74. I was born here, and I have lived here all my life. My father was born here and served in North Africa in WW2. He was nearly killed in Sicily. In a bizarre way that could well have saved his life, since his regiment took part in the Normandy Landings. My Grandfather was born here and served in France in WW1. He was injured too but survived. My uncle was born here and took part in D-Day. I could go further back too, so I’m not going to have some ignorant #### (insert your own choice of epithet – this isn’t so far a sweary blog) try to tell me I don’t belong here.
The reality is the opposite. The behaviour of this buffoon (on this occasion I don't mean Boris Johnson) is not democratic. It is not patriotic. It is a betrayal of everything my Father, Grandfather and Uncle put their lives on the line for. It is a betrayal of everything he claims to be standing for! It is him and people like him who are undermining democratic processes. It is him and people like him who are undermining the rule of law. It is him and people like him who are enabling and encouraging the growth of racism and xenophobia.
Do not let them get away with it.
Challenge them at every opportunity.
Do not give up.
Another really worrying aspect is the overlap between Brexiters and the COVID19 deniers. It isn't 100% by any means, but enough to be concerned not just about our political and economic future, but literally about our very existence. I've no doubt that we will eventually got on top of this Pandemic, but we also need to learn from it, because there will be another one.
There is little sign though of any capacity to think rationally and logically in either the loudest Brexiters or the COVID19 deniers so the chances of any learning taking place are slim. (It occurs to me that the only Flat Earther I've ever come across in the wild was also a Brexiter...)
A final story.
Ten years after my father was nearly killed in Sicily he almost died again, seriously injured in an industrial accident that with hindsight was probably due to cutting corners by his employer. Leaving the EU also means leaving the umbrella of their worker protection and Health and Safety rules. Tories have already started demanding we cut back on them and on environmental standards.
Don't let them have their own way.
Past generations fought to get us here. We owe it to future generations to go forward, not back to some fantasy of the Empire.